搜索
Search
imgboxbg

News center 

All categories
Your location:
Homepage
/
Company news

Classification of brake motors

Brake motors are divided into: DC brake motors, interchangeable brake motors. The DC brake motor needs to be equipped with a rectifier. The rectified voltage is 99V, 170V or 90-108V. Because the DC brake motor needs to pass the rectified voltage
Learn more
08
2020-07

How much do you know about the performance of the brake motor

Release time:2020-07--08 Hits:0
The rear end cover of the brake motor is equipped with a conflict disc and excitation coil made of asbestos wear-resistant material. When the motor loses power, the conflict disc is pressed by the brake spring through the block pressing plate and tightly pressed on the machined surface of the motor rear cover
查看详情 查看详情
07
2020-07

Brake motor installation and trial operation

Release time:2020-07--07 Hits:0
1. Preparation work before the installation of the brake motor. Motors that have been newly installed or idle for more than three months shall be checked for their functions, electrical functions and machine functions before application to ensure reliable operation of the motors.
查看详情 查看详情
06
2020-07

Disassembly steps and maintenance of brake motor

Release time:2020-07--06 Hits:0
Brake motor disassembly and maintenance. Motor disassembly step: use a puller to remove the pulley or coupling, remove the motor tail wind cover, remove the front bearing cover screws and the front and rear cover screws. For larger motors, before disassembling, use a drawing needle on the two end caps and the base respectively to make the original fixed position codes, and knock the top of the front axle with a wooden hammer to loosen the rotor and the rear cover from the base. , And then remove the rotor from the stator. When taking the rotor, you must be careful not to let the rotor scratch the insulation of the stator winding end.
查看详情 查看详情
05
2020-07

Daily maintenance of brake motor

Release time:2020-07--05 Hits:0
The daily protection of the brake motor is quite important to reduce and spare the motor from malfunctioning during operation. The tense joint is the root cause of the patrol inspection and timely removal of any unusual signs. After the disorder occurs, the disorder is analyzed and countermeasures are taken. It is an indispensable technical work to reduce the number of disturbances and improve motor operation obedience during maintenance and shutdown.
查看详情 查看详情
03
2020-07

Don't you want to know how the brake motor brakes

Release time:2020-07--03 Hits:0
The layout of the power-off brake motor is simple: the parts are small, the reliability is high, the air gap adjustment is easy, and the maintenance is convenient. Small size, light weight, easy to install, the motor and the brake are connected as a whole, the volume is reduced to a very small, the weight is also light, the layout is firm, and the small space can be installed. The brake noise is low, and the DC brake is adopted, without electromagnetic noise, and the brake noise is low.
查看详情 查看详情
Previous page
1
2

Tel

0576-82335168

Mobile

13705767238

QR code

Scan and visit
Mobile website

TOP

X
<

Copyright © Taizhou Taili Explosion Proof Motor Co., Ltd.  All Rights Reserved        浙ICP备11008472号        Powered by www.300.cn

Links:SHENZHEN

Taili