Brake Supplier: A Detailed Explanation of Brake Knowledge?

With the continuous advancement of science and technology, all walks of life have also developed greatly. The development prospects of brakes are also very good, with increasing demand and a growing number of brake suppliers on the market. As a brake supplier, it is necessary for us to share some knowledge about brakes. Interested friends can take a look.

　　With the continuous advancement of science and technology, all walks of life have also developed greatly. The development prospects of brakes are also very good, with increasing demand and a significant increase in the number of products on the market. Brake Supplier As manufacturers, it is also very necessary for us to tell you about its small knowledge points here. Interested partners can come and have a look.

　　Many problems accompany everyone before using the brake, so in order to use it better, you need to understand some of its knowledge points. The brake is one of the frequently operating components in the elevator. It can stop the elevator motor without power and make the car stop effectively. The safe operation of the elevator is closely related to the working condition of the brake. Therefore, many accident cases now show that one of the main reasons for elevator personal injury accidents is brake failure or its own design defects, resulting in elevator bumps, bottoming, sliding, or even shearing. Therefore, it is particularly important to strengthen the safety inspection of elevator brakes. The brake supplier suggests that you should also be aware that when using it, you need to know that the travel indicator collides with the activity indicator, and some manufacturers' designers have not carefully considered the uniqueness of the travel indicator installation. Long-term use will cause the brake shoe to fall off and stick. The brake supplier believes that attention should be paid to the aging and cracking of the sealing rubber, and foreign objects falling into it, causing the brake to jam. The electromagnetic iron core rusts, causing the brake to jam. The design of the hanging card iron core guiding mechanism is unreasonable, and there are multiple breaks at the connection between the copper bar and the iron core, causing the brake to jam.

       

　　The brake supplier recommends that sufficient braking torque should be generated to reliably stop the car when the elevator power or control circuit power is lost for any reason. Therefore, braking torque is its main parameter. Of course, it is mainly used to ensure that the running elevator stops under the standard required deceleration. If you are using it, it is recommended that during the inspection process, when the vehicle is unloaded and moves upward at normal operating speed to the upper part of the stroke, turn off the main power switch and check whether the vehicle is braked, deformed, and damaged. The brake supplier reminds everyone that during the inspection process, the vehicle carries 125% of the rated load and descends at normal operating speed. When the car runs to the lower landing station, cut off the power of the motor and brake, and the car should stop reliably without obvious deformation and damage. Usually, an acceleration and deceleration tester is used for on-site testing and recording numerical values, and the instrument can display the average deceleration. The brake supplier's products have a compact structure and reasonable design.

　　After the introduction of the above content, we also know some of its characteristics. I hope that after reading it, you can have a further understanding of it. If you need it, please feel free to contact us. Brake Supplier 。