Daily maintenance of brake motors

Publish Time:

2020-07-05

Daily maintenance of brake motors is crucial for reducing and preventing malfunctions during operation. Key aspects include regular inspections and promptly addressing any unusual signs to eliminate root causes. After an incident, thorough analysis and corrective actions are essential technical tasks to reduce the frequency of incidents, minimize downtime, and improve motor operational efficiency. While daily maintenance is important for normal operation, motors often encounter unexpected situations during operation, such as short circuits, overloads, and phase failures. To prevent damage under these conditions, certain operational protection measures are implemented. Keep the motor clean. Water droplets, oil stains, dust, etc., are not allowed inside the motor. Regularly clean dust from the inside and outside of the motor. Ensure the load current does not exceed the rated value. Regularly check for bearing overheating and oil leaks, paying particular attention to scheduled lubrication. The temperature rise of the brake motor must not exceed the rated value. 1. Listen to the motor's operating sound. If there are any unusual sounds, replace the bearings immediately. When replacing bearings, ensure that the shaft and bearing housing accuracy have not been damaged. 2. Regularly check the motor's temperature. If the motor temperature is too high, stop the motor or reduce the load. If the temperature is high under normal load, check for insulation damage. 3. Regularly lubricate the brake motor bearings and clean the fan and housing. The specific frequency depends on the operating conditions.

While routine maintenance is important for normal motor operation, motors often encounter unexpected situations during operation, such as short circuits, overloads, and phase failures. To prevent damage under these conditions, certain operational protection measures are implemented. Keep the motor clean. Water droplets, oil, dust, etc., are not permitted inside the motor, and dust should be regularly removed from both the inside and outside of the motor. Ensure the load current does not exceed the rated value. Regularly check for bearing overheating, oil leaks, etc., and lubricate according to regulations.

The temperature rise of the brake motor must not exceed the rated value.
1. Listen to the motor's operating sound. If the sound is abnormal, immediately replace the bearing. When replacing the bearing, confirm that the shaft and bearing housing precision have not been damaged.
2. Regularly check the motor's temperature. If the motor temperature is too high, stop the motor or reduce the load. If the temperature is high under normal load, check for insulation damage.
3. Regularly lubricate the brake motor bearings and clean the fan and housing. The specific frequency depends on the operating conditions.